Page 82CWT Compact S4 Touch Installation & Maintenance Manual for CWT 1.0-0Issue 3
Corrective maintenance
Figure 49, The door hinge mechanism is the same om all models
Assembly
Follow the directions above in reverse order.
Important:
Loosen the lower hinge pin’s locking screw to let the hinge pin enter the
corresponding hole in the cabinet.
8.8.2
E-lock replacement
Removal
1. Disconnect the cables from the E-lock.
2. Remove four nuts and remove the E-lock. A small box spanner (10 mm) is
required to remove the lower E-lock due to limited space.
Assembly
Ensure that the dowel pin (see arrow) mates with the locking latches.
To Next Page
Loading...