Flowserve Limitorque Accutronix MX

To Previous Page

Limitorque

5114 Woodall Road, P.O. Box 11318

Lynchburg, VA 24506-1318

Phone: 434-528-4400

Facsimile: 434-845-9736

http://www.limitorque.com

Limitorque

Abex Road

Newbury

Berkshire, RG14 5EY

England

Phone: 44-1-635-46999

Facsimile: 44-1-635-36034

Limitorque Nippon Gear Co., Ltd.

Asahi-Seimei Bldg. 9th Floor

1-11-11 Kita-Saiwai, Nishi-Ku

Yokohama-Shi, (220-0004)

Japan

Phone: 81-45-326-2065

Facsimile: 81-45-320-5962

Limitorque India, Ltd.

302, Mansarovar

90 Nehru Place

New Delhi - 110019

India

Phone: 91-11-6431-748

Facsimile: 91-11-6432-749

Limitorque Australia Ltd.

17 Scoresby Road

Bayswater, Victoria

Australia

Phone: 613-9729-2633

Facsimile: 613-9729-2644

Limitorque Asia, Pte., Ltd.

48A Loyang Way

Singapore 508741

Phone: 65-6-214-2120

Facsimile: 65-6-214-2123

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to

perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in

numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific

data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation,

operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with

the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application.

While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered

certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding

any matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information

contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at

any one of its worldwide operations or offices.

Flow Control Division

Limitorque Actuation Systems

FLOWSERVE CORPORATION

FLOW CONTROL DIVISION

Limitorque Actuation Systems Operations

5114 Woodall Road

P.O. Box 11318

Lynchburg, VA 24506-1318

Phone: 434-528-4400

Facsimile: 434-845-9736

www.limitorque.com