Flowserve Limitorque Accutronix MX - Handwheel Adapter (MX-05); Figure 4.21 - Handwheel Adapter (MX-05); Table 4.19 - Handwheel Adapter Parts List (MX-05)

Mechanical Assemblies
Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002
STEP 6
Remount all removed subassemblies according to their remounting instructions in the following order:
1. Base plate (subassembly #11). (See Section 4.9.2.)
2. Worm shaft (subassembly #3). (See Section 4.10.2.)
3. Handwheel declutch (subassembly #5). (See Section 4.2.2.)
4. Clutch and clutch ring (subassembly #16). (See Section 4.15.2.)
5. Handwheel adapter (subassembly #12). (See Section 4.14.2.)
6. Top-mounted handwheel (subassembly #1-8) or side-mounted handwheel (subassembly #13). (See
Section 4.3.2 or 4.4.2.)
7. Motor (subassembly #4). (See Section 4.1.2.)
8. Thrust base (subassembly #10) - if fitted. (See Section 4.8.2.)
4.13 Handwheel Adapter (MX-05)
Table 4.19 – Handwheel Adapter Parts List (MX-05)
Part Number Description Qty.
12-1 Handwheel Adapter 1
12-2 Needle Bearing 1
12-3 Quad Ring 1
12-4 O-Ring 1
Figure 4.21 – Handwheel Adapter (MX-05)
4-49
Flow Control Division
Limitorque Actuation Systems
12-1
12-2
12-3
12-4