Flowserve Limitorque Accutronix MX - Accutronix MX Actuator Subassembly Overview; MX Actuator Subassembly Components

Accutronix MX Actuator Subassembly
Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002
2 Accutronix MX Actuator Subassembly
Figure 2.1 – Accutronix MX-05 Actuator
2.1 MX Actuator Subassembly Components
2-1
Flow Control Division
Limitorque Actuation Systems
1 & 13
3
4
15
10
11
14
8
7
6
5
2
12
1. Top-mounted handwheel
2. Drive sleeve
3. Worm shaft
4. Motor
5. Declutch Lever
6. Encoder
7. Accutronix Control Panel (ACP)
8. Control module
10. Optional bases
Torque Base type:
• B1 = ISO 5210 base (fixed bore & key)
Thrust Base type:
• A1 = Standard thrust base
• A1E = Entended-reach thrust base
11. Baseplate-type B4 with stem nut options type:
• B4 = stem nut with variable bore and key
• B4E = extended-reach stem nut with variable
bore and key
• BL = splined stem nut (SAE or Involute)
12. Handwheel adapter/handwheel worm gear
13. Side-mounted handwheel (not shown)
14. Encoder drive cartridge
15. Terminal block