Flowserve Limitorque Accutronix MX - MX-85 & 140 Handwheel with SGA; Figure 4.9 - Side-Mounted Handwheel with SGA (MX-85 & 140); Table 4.9 - Side-Mounted Handwheel Parts List (MX-85 & 140)

Mechanical Assemblies
Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002
4.5.a MX-85 & 140 Handwheel with SGA
Table 4.9 – Side-Mounted Handwheel Parts List (MX-85 & 140)
Part Number Description Qty.
13-1 Handwheel Worm Shaft 1
13-2 Spur Adapter Plate 1
13-3 Ball Bearing 1
13-5 Spiral Pin 1
13-6 Gasket 1
13-7 Key 1
13-8 Needle Bearing 1
13-9 Socket Head Cap Screw M8x25 4
13-10 Side-Mounted Handwheel 1
13-11 Ball Bearing 1
13-12 Handwheel Input Gear 1
13-13 Spur Adapter Cap 1
13-14 Handwheel Input Pinion 1
13-15 Oil Seal 1
13-17 Dowel Pin 1
13-18 Set Screw 1
13-19 Gasket 1
13-20 Socket Head Cap Screw M8x20 4
13-22 Ball Bearing 1
13-23 Ball Bearing 1
13-24 Key 2
13-28 Retaining Ring 1
Figure 4.9 – Side-Mounted Handwheel With SGA (MX-85 & 140)
4-18
Flow Control Division
Limitorque Actuation Systems
13-10
13-18
13-17
13-19
13-9
13-6
13-5
13-1
13-8
13-24
13-24
13-3
13-28
13-2
13-17
13-14
13-7
13-23
13-15
13-11
13-12
13-22
13-13