Flowserve Limitorque Accutronix MX - Control Module

Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002
STEP 7
Secure the ACP with the four M8 screws (#7-27) using a
6mm hex key.
5.2 Control Module (MX-05, 10, 20, 40, 85 & 140)
Table 5.2 – Control Module Parts List
Part Number Description Qty.
8-1 Controls Chassis Plate 1
8-3 Power Board 1
8-4 Main Processor Board 1
8-5 Phillips Pan Head Mach 4
8-7 Socket Head Cap Screw (M4x10) 3
8-8 Chassis Assembly 1
8-9 DDC Board (Network Board) - Optional 1
8-10 PC Board, (I/O Board) - Optional 1
8-24 PC Board, Local Control Station 1
8-25 Socket Head Cap Screw (M4x6) 4
8-26 Ribbon Cable Assembly 1
Figure 5.2 – Control Module
5-4
Flow Control Division
Limitorque Actuation Systems
Electronic Assemblies
7
}
8-10
8-9
8-26
8-7
optional
components
8-4
8-8
8-3
8-25
8-1
8-3
(Power
Board)
8-4
(Main
Processor
Board)
8-9
(DDC
Board
optional)
8-10
(I/O Board
optional)
8-24
ACP Board
(mounted
inside ACP
cover)
8-26
(Ribbon cable shown
connected to boards)
8-5