Flowserve Limitorque Accutronix MX - Encoder Drive Cartridge

Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002
5.7 Encoder Drive Cartridge
(MX-05, 10, 20, 40, 85 & 140)
Table 5.7 – Encoder Drive Cartridge Parts List
Part Number Description Qty.
14-1 Encoder Drive Cartridge 1
14-2 Encoder Drive Shaft 1
14-3 Encoder Pinion 1
14-4 Ball Bearing 2
14-5 Oil Seal 1
14-6 Retaining Ring 1
14-7 Roll Pin 1
14-8 Socket Head Cap Screw 1
14-9 O-Ring 1
6-25 Input Gear, 19-tooth 1
Table 5.8 – Encoder Drive Cartridge Drive Sleeve Speed
Drive Sleeve Speed I.D. 1 2 3 4 5 6 7 8
50 Hz. RPM 15
2
22 33 43 65 84/110
1
127/143
1
165
2
60 Hz. RPM 18
2
26 40 52 77 100/131
1
155/170
1
200
2
NOTE: Reference the Output RPM block located on the MX nameplate and cross-reference in table
above to determine the unit Drive Speed I.D.
NOTE 1: MX-85 & 140 only.
NOTE 2: N/A MX-85 & 140.
Figure 5.16 – Encoder Drive Cartridge
5-30
Flow Control Division
Limitorque Actuation Systems
Electronic Assemblies
14-1
14-2
14-3
14-4
14-5
14-6
14-7
14-8
14-9
6-25 (MX units with Drive
Speed I.D. 1 or 2 require
additional spur gear).
Reference table above.