Flowserve Limitorque Accutronix MX - Thrust Base Type A1;A1 E

Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002
4.7 Thrust Base Type A1/A1E
Table 4.10 – Type A1 Thrust Base Parts List (MX-05)
Part Number Description Qty. (MX-05) Qty. (MX-10)
10-1 Thrust Base Housing 1 1
10-2 Thrust Pilot 1 1
10-3 Thrust Nut (A1 or A1E) 1 1
10-4 Bearing 1 1
10-5 Bearing Retainer 1 1
10-6 Socket Head Cap Screw 1 1
10-7 Washer 1 1
10-8 Pipe Plug 1 1
10-9 Socket Head Setscrew 1 1
10-10 Socket Head Cap Screw 4 4
Figure 4.10 – Type A1 Thrust Base (MX-05)
NOTE: The MX-05 A1/A1E thrust base uses sealed bearings, lubrication is not required.
4-30
Flow Control Division
Limitorque Actuation Systems
Mechanical Assemblies
10-1
10-2
10-3
10-4
10-5
10-6
10-7
10-8
10-9
10-10
10-8