Limitorque
®
Master StationI V EEP-SN4001 FCD LMENIM5010-00-AQ – 03/19
53
flowserve.com
Figure 7.29 – Polling Priority, Active MOVs
Note: to optimize the network efficiency, lower priority MOVs can be set to be polled at a user defined cycle.
7.2.7 File Manager
The File Manager menu allows the user to import/load/export MSIV configuration files, load tag files, export event logs,
update the system software, and restore to factory defaults. Note: The File Manager is disabled when the unit is in Active
mode. To turn off “Active” mode, go to the System Configuration menu and select the “Redundant Config” button.
Under Requested Mode, select the “Disabled” button.
Figure 7.30 – File Manager Menu
Import Config File: enables the user to import an existing system configuration file from a connected USB flash
drive.
Import Tag File: enables user to import a spreadsheet to the MSIV’s tag configuration settings.
Load Config File: enables the user to import a saved system configuration file from system memory
Export Config File: enables the user to save the configuration file to a connected USB flash drive
To Next Page
Loading...
Need help?
General
