- 104 -
Library Window… Edit Menu
The edit menu is used to select, deselect, and delete specific particle images.
Select All (Ctrl+F2)
Selects all particle images currently displayed in all image collages. This will place a red border around
each particle image.
Deselect All (F2)
Deselects all particle images. The red border is removed from any particle images currently selected.
Select All This Page (Ctrl+F3)
Selects all particle images on the currently displayed page. This will place a red border around each
particle image.
Deselect All This Page (F3)
Deselects all particle images on the currently displayed page. The red border is removed from any
particle images currently selected.
Delete Images Selected
Deletes any particle image that is currently selected (images with a red border). Note that with this
function there is no “undo delete” option.
Delete Images NOT Selected
Deletes all particles that are NOT currently selected (images without the red border). When particle
images are deleted from a Library, they are removed from view in the Library Window. If the Library is
saved using File > Save, then the particle images will be also be removed from the TIFF (tif) file(s)
storing the particles images for the Library. The images can be recovered by reselecting the deleted
particles in the View window and adding them back to the Library. Note that with this function there is
no “undo delete” option.
To Next Page
Loading...
Need help?
General
