- 52 -
Exit
All VisualSpreadsheet windows close and the application is ended. Note: if any changes have been
made to the List file during a session (such as deleting particles), a dialog will open indicating this and
asking if you wish to save the data prior to closing.
Edit Menu
Open View Window… (F2)
Opens the View window to display a collage of the particles making up the current data on the Main
window selection.
Show All Data (F3)
The Main window selection may be constrained on the x-axis by the user during an analysis. Use this
option to automatically adjust the Main window to display all data.
Delete Selected Particles
Deletes the particles selected in the interactive graph. Note that the View Window must be closed to
enable this menu option. Particles deleted using this menu option are not permanently deleted from the
original List file. But once the displayed List contains only the particles desired, you can use the Save
List As… menu option in the File Menu to create a new List which will not contain any deleted
particles.
Delete Particles NOT Selected
Deletes the particles that are not currently selected in the interactive graph. Note that the View Window
must be closed to enable this menu option. Particles deleted using this menu option are not permanently
deleted from the original List file [see changes under Delete Selected Particles…]. For example, once
the displayed List contains only the particles desired, use the Save List As… menu option in the File
Menu to create a new List (which will not contain any deleted particles).