Fluid Imaging Technologies FlowCAM - Flowcam Size & Count Calibration Verification Report

- 129 -
Serial No.: Test Date:
Model No.:
Size Procedure
Bead Mix Pass/Fail
2X Bead Mix
4X Bead Mix
10X Bead Mix
20X Bead Mix
Count Procedure
Objective
Bead Size
(µm)
Listed Count
(P/mL) FlowCAM Count (P/mL) Pass/Fail
2X
4X
10X
20X
If a particular objective was not required/available for testing enter “N/A”
Notes (reagent lot numbers, etc.):
Testing Performed By:
__________________________________________ _________________________________
Signature / Printed Name Title