- 79 -
Tools Menu
Time Series Graph
The Time Series Graph (as seen in the example above) is a basic tool to display various information
about the sample being analyzed in real time. For example, the Time Series Graph can be open during
an analysis and set to display Frequency Count. Right click on the gray graph area to display a menu of
the available graphs. These include:
· Frequency Plot
· Parts Per Million Plot
· Particles Per ML Plot
· Average Diameter Plot
· Export Data… (this is not a plot, but a way to export the displayed data)
The File Menu only includes one function, which is Close (which closes the Time Series Graph). The
Settings Menu contains two functions. The first one is Configure… which allows the user to set up how
the data will be displayed on the graph. On this Configure Graph dialog box, there are two sections.
The Colors section allows the user to click and select their desired colors for the graph background and
data plot. The Time section allows the user to set the Time Bin Size (in seconds) and the Visible Time
Span (in minutes). The second function in the Settings Menu is the AutoAdjust Y-Scale. Selecting this
function will automatically adjust the Y-Scale of the Times Series Graph to encompass and display the
entire data set. Note that the user can click the box at the top of the Y-Axis (which displays the
To Next Page
Loading...
