- 114 -
Build Value Filter…
Selecting this function will open a Filter dialog box and automatically populate the Currently Using
section with all available fields and their corresponding values. These values are derived from the Class
Tab that is highlighted. This menu item allows the user to build a filter using the particle
properties/characteristics of a Class. This is a value filter (a filter based on parameter measurements).
Build Statistical Filter…
Selecting this function will open a Filter dialog box and automatically populate the Currently Using
section with all available fields and their corresponding values. These values are derived from the Class
Tab that is highlighted. This menu item allows the user to build a filter using the particle
properties/characteristics of a Class. This is a statistical filter (a filter based on derived statistics).
Classification Window… Statistics Menu
Summary Statistics…
This window provides statistics on the particle properties for particle images being viewed in the
currently selected Class tab.
Classification Window… Show Menu
Particle Properties (F8)
Shows or hides the Particle Properties window. Moving the cursor over any particle image causes
particle properties to be displayed in the Particle Properties window.
Images (F9)
Shows or hides the display of particle images. This menu command does not affect the number of
particle images included in the Summary Statistics calculations or the exporting of particle property
data.
Ruler
Shows or hides the Ruler line at the bottom of the Classification Window Image Collage.
Right Click Popup Menu
To use the Popup Menu in the Classification Window, right click on one of the particle images.
Remove Particle: Removes the particle image from the currently selected Class tab.
Add To Library: Adds the particle to any Library Tab currently open in the Library Window. The
Library window must be open with at least one Library open in it.
To Next Page
Loading...
Need help?
General
