Fluid Imaging Technologies FlowCAM User Manual

- 110 -
Classification Window… Edit Menu
The edit menu is used to select, deselect, and delete specific particle images.
Select All (Ctrl+F2)
Selects all particle images currently displayed in all image collages of the open Class. This will place a
red border around each particle image.
Deselect All (F2)
Deselects all particle images. The red border is removed from any particle images currently selected.
Select All This Page (Ctrl+F3)
Selects all particle images on the currently displayed page. This will place a red border around each
particle image.
Deselect All This Page (F3)
Deselects all particle images on the currently displayed page. The red border is removed from any
particle images currently selected.
Remove Images Selected
Deletes any particle image that is currently selected (images with a red border).
Remove Images NOT Selected
Deletes all particles that are NOT currently selected (images without the red border).

Fluid Imaging Technologies FlowCAM Specifications

General

Brand	Fluid Imaging Technologies
Model	FlowCAM
Category	Measuring Instruments
Language	English