Fluid Imaging Technologies FlowCAM - Preface

- 5 -
Thank You
Fluid Imaging Technologies, Inc. would like to thank you for making the important decision to purchase
the FlowCAM
®
system. We are committed to manufacturing quality products and providing
unsurpassed customer service.
Copyright Notice
FlowCAM
®
and VisualSpreadsheet
®
are registered trademarks of Fluid Imaging Technologies, Inc.
Microsoft Windows and Microsoft Excel are trademarks of Microsoft Corporation. All other trademarks
used within this manual are hereby acknowledged.
Copyright 2011 Fluid Imaging Technologies, Inc. All Rights Reserved Worldwide.
Fluid Imaging Technologies customers may reproduce this manual in printed form provided the content
remains unchanged. Reproduction or republication of any portion of this manual for any other purpose
is prohibited without the expressed written consent of Fluid Imaging Technologies, Inc.
Manual Information
FlowCAM
®
Manual. Version 3.0, September 2011. VisualSpreadsheet
®
3.0, Portable, Open Benchtop,
Benchtop Models. Manual edited by Benjamin Spaulding, Laboratory Manager.