- 90 -
View Window… File Menu
Save As List…
This menu item saves all of the particles in the View window (all image collages) to a new List file
(.lst). Note that only the currently viewable particle images are saved, not necessarily all the particles
originally selected using the Interactive Graphs in the Main window. This function is typically used
after editing an original list file to save the results (such as after deleting unwanted particles). To protect
the original List file, the file name entered in the Save List As… dialog box must be different then the
name of the List file currently open.
Save As Library…
Save As Library… saves all of the particles in the View window (all image collages) to a Library file
(.flb). Note that only the currently viewable particle images are saved, not necessarily all the particles
originally selected using the Interactive Graphs in the Main window. For example, if a filter is currently
applied, only those particles that meet the filter conditions will be saved.
Save Image…
The Save Image command saves the images currently viewable in the View Window as a TIF file (.tif)
collage. This is typically done to generate images that display important results that might be included in
a report or paper.
Export Data…
The Export Data… menu command exports the particle property data for the particles contained in the
data set currently displayed in the View Window (i.e. the number of particles will equal the value
displayed in the Total section of the Status Bar). The initial default export is as a .csv file. If a Preferred
Spreadsheet Application has been configured, then the application assigned will be used to open the
exported data file.
Export Summary Data…
The Export Summary Data… command exports the statistical summary data for the particle images
shown in the View Window. The spreadsheet application is started automatically if installed and
configured.
To Next Page
Loading...
Need help?
General
