- 112 -
Edit Class…
Selecting this menu command will reopen the Particle Class Setup dialog box for the currently selected
Class Tab. Changes can then be made and saved to the Class.
Delete Class
Permanently deletes the currently selected Class tab. Warning: A Confirm Delete? message box will
NOT appear and the deletion cannot be undone. The Classification may be closed without saving
changes and reopened to return to the original state. Alternatively, a new Class can be created and
repopulated with particle images from the original source to recover from deleting a Class that was not
intended to be deleted.
Export Class Data…
This menu command exports the particle property values for each particle image in the currently
selected Class tab in the Classification Window.
Export Class Summary…
This menu command exports the Summary Statistics data for the currently selected Class tab in the
Classification Window.
Save Class As New List…
Enter the File name for the new List file and click the Save button to save in a selected folder.
Save Class As New Library…
Enter the File name for the new Library file and click the Save button to save in a selected folder.
Save Image…
The Save Image command saves the images currently viewable in the currently selected Class Tab as a
TIFF file (.tif) collage. This is typically used for displaying results that might be included in a report or
paper.
To Next Page
Loading...
