- 55 -
Context… Load
Load Factory Default Context: Allows the user to load in the most basic software settings for the
particular instrument configuration (examples include 2X, 4X, 10X, or 20X objectives), as determined
by the manufacturer.
Load Local Default Context: Allows the user to load in the context file that had been saved previously
as the local default (see below).
Save as Local Default Context: Allows the user to save the current context settings as the default
settings for the current configuration. Whenever this configuration is opened, the local default context
settings are automatically loaded.
Load a Context File…
Load Context… opens a file open dialog box. The file open dialog box is displayed with the .ctx file
extension. Select an existing Context file and click the Open button. Using an existing Context file can
save time over manual configuration of context settings when the settings differ from either the Local
Defaults or the Factory Default values.
Save Context File As…
Save Context As…opens a file open dialog box. The file open dialog box is displayed with the .ctx file
extension. Enter a file name and click the Save button. Saving a context file and later loading it using
Load a Context File can save time over manual configuration of context settings when the settings differ
from either the Local Default or the Factory Default values. One example would be saving the settings
for an experiment in the main folder containing the data runs for that experiment.
To Next Page
Loading...
