General Aspects
Safety Information: Read First 1
1-5
See explanation in
manual
Direct Current
Safety Approval
Earth
Double Insulation
(Protection Class)
Conformité Européenne
Alternating Current
Li-Ion
Recycling information
Disposal information
Safety Approval
Conforms to relevant
Australian standards
RoHS China
Current Clamp
Do not apply around or
remove from hazardous
live conductors.
Do no dispose of this
product as unsorted
municipal waste. Go to
Fluke’s website for
recycling information
Warning
To avoid electrical shock or fire:
• Review the entire manual before use of the Analyzer and its
accessories.
• Carefully read all instructions.
• Do not work alone.
• Do not use the product around explosive gas, vapor, or in
damp or wet environments.
• Use the product only as specified, or the protection supplied
by the product can be compromised.
• Use only insulated current probes, test leads and adapters as
supplied with the Analyzer, or indicated as suitable for the
Fluke 434-II/435-II/437-II Analyzer.
• Keep fingers behind the finger guards on the probes.
• Before use, inspect the Analyzer, voltage probes, test leads
and accessories for mechanical damage and replace when
damaged. Look for cracks or missing plastic. Pay special
attention to the insulation surrounding the connectors.
• Verify the Analyzer’s operation by measuring a known voltage.
• Remove all probes, test leads and accessories that are not in
use.
• Always connect the Power Adapter first to the AC outlet before
connecting it to the Analyzer.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
• Use the ground input only to ground the Analyzer and do not
apply any voltage.
• Do not apply input voltages above the rating of the instrument.
• Do not apply voltages in excess of the marked ratings of the
voltage probes or current clamps.
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca
To Next Page
Loading...
Need help?
General
