Fluke 434-II/435-II/437-II
Users Manual
1-4
# Description
1 Power Quality Analyzer Fluke 43x Series II + Side Strap, Battery Pack BP290 (28 Wh) and 8 GB
SD Memory Card Installed
2 Decal Set for Input Sockets (EU & UK, EU, China, UK, US, Canada)
3 Hang Strap
4 Alligator Clips. Set of 5
5 Test Leads, 2.5 m + Color Coding Clips. Set of 5
6 Power Adapter
7 Line Plug Adapter Set (EU, US, UK, Australia/China, Switzerland, Brazil, Italy) or Regional Power
Cord.
8 Safety Instructions Booklet (Multi-Language)
9 CD-ROM with Manuals (Multi-Language), PowerLog Software, and USB drivers
10 USB Interface Cable for PC Connection (USB-A to mini-USB-B)
11 Flexible 6000 A AC Current Probe (not in Basic Version)
Fluke 434-II/435-II: Fluke 437-II:
12 Soft Carrying Case C1740 Hard Case with Rollers C437-II
Contacting a Service Center
To locate a Fluke authorized service center, visit us on the World Wide Web at:
www.fluke.com
or call Fluke using any of the phone numbers listed below:
+1-888-993-5853 in the U.S. and Canada
+31-40-2675200 in Europe
+1-425-446-5500 from other countries
Safety Information: Read First
The Fluke 434-II/435-II/437-II Three Phase Energy and Power Quality Analyzer
complies with:
IEC/EN61010-1-2001,
CAN/CSA C22.2 No 61010-1-04 (including
c
CSA
us
approval),
UL std No 61010-1,
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use, Part 1: General requirements, Rated: 600V CAT IV 1000V CAT III Pollution
Degree 2.
Use the Analyzer and its accessories only as specified in the Users Manual. Otherwise,
the protection provided by the Analyzer and its accessories might be impaired.
A Warning identifies conditions and actions that pose hazard(s) to the user.
A Caution identifies conditions and actions that may damage the Analyzer.
The following international symbols are used on the Analyzer and in this manual:
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca
To Next Page
Loading...
Need help?
General
