Specifications
Electrical Measurements27
27-3
CROSS TALK
Between V inputs -60 dB @ Fnominal
Voltage to current input -95 dB @ Fnominal (Amps Scaling: x1 AC+DC)
COMMON MODE REJECTION RATIO (CMRR)
CMRR >60 dB
DISPLAY MODES
Waveform display Available in all modes via SCOPE key.
Default display mode for Transients function
Update rate 5x per second
Displays 4 cycles of waveform data on screen, up to 4 waveforms
simultaneously
Phasor Available in all modes via Scope waveform display
Default view for Unbalance mode
Meter readings Available in all modes except Monitor, provides tabulated view of all available
readings
Fully customizable up to 150 readings for Logger mode
Trend graph Available in all modes except Transients
Single vertical cursor with min max and average reading at cursor position
Bar graph Available in Monitor and Harmonics mode
Event list Available in all modes
Provides 50/60
1
cycles of waveform information and associated ½ cycle rms
values for Volts and Amps
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca
To Next Page
Loading...
Need help?
General
