Fluke 5520A - 6-33. DC Voltage Calibration; 6-34. AC Voltage Calibration

Remote Operation
Setting up the IEEE-488 Port for Remote Control 5
5-7
UUT
SERIAL 1
FROM HOST
Port
5520A Calibrator
Controller
System for a UUT without a remote port.
UUT
5520A Calibrator
Controller
System for a UUT with an RS-232 port (via PC).
UUT
5520A Calibrator
Controller
System for a UUT with an RS-232 remote port (via 5520A).
SERIAL 2
TO UUT
Port
COM Port
RS-232
Port
COM Port
SERIAL 1
FROM HOST
Port
COM Port
COM Port
RS-232
Port
nn301f.eps
Figure 5-2. Typical RS-232 Remote Control Connections