5520A-SC300 Option
Oscilloscope Connections
8
8-65
8-85. Oscilloscope Connections
Using the cable supplied with the Oscilloscope Calibration Option, attach the SCOPE
connector on the 5520A to one of the channel connectors on your oscilloscope (see
Figure 8-3.
To use the external trigger, attach the TRIG OUT connector on the 5520A to the external
trigger connection on your oscilloscope. To use the external trigger and view its signal
with the calibration signal, attach the TRIG OUT connector to another channel. See your
oscilloscope manual for details on connecting and viewing an external trigger.
HI
LO
TRIG
GUARD
TC
20A
NORMAL AUX
SCOPE
OUT
V, , ,
RTD
A, -SENSE,
AUX V
20V PK MAX
20V PK MAX
5520A
CALIBRATOR
nn230f.eps
Figure 8-3. Oscilloscope Connection: Channel and External Trigger
To Next Page
Loading...
