Flyer Mountain - Page 46

44
Category Code Displayedtext Remedy
0E
12
2E
2F
30
ECU Maintenance
Your FLYER e-bike is connected to the mainte-
nance software.
0F 13 Kickstand unfolded The side stand is unfolded (motor assistance
not possible). If this is not the case, ask your
FLYER specialist retailer to inspect the sensor in
the side stand.
10 14 Not unfolded The folding mechanism is open (motor assis-
tance not possible). If this is not the case, ask
your FLYER specialist retailer to inspect the
sensor in the side stand.
11 58 enviolo Communication Error
Check the connections to the enviolo speed
gear. Remove the battery and put it back in
before restarting the system.
12 59 enviolo initialisation required
Initialise the enviolo speed gear. Settings ->
Calibration -> Calibrate enviolo
33
18
19
Remote Error Check all connections to the remote.
34 1A USB error
USB communication error. Remove the device
from the USB port and restart the system.
35 1B RTC battery empty
Check whether the time has been correctly
conguredandrestartthesystem.Iftheerror
persists, contact your FLYER specialist retailer.
36 1C Light Sensor Error
Clean the display and restart the system. If the
problem persists, contact your FLYER specialist
retailer.
37 42
Bluetooth Communication
Error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
38
43
44
45
46
Display Software
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
39
47
48
49
4A
4B
DisplayIdentication
Verify that the originally supplied components
are connected and restart the system.
3A
4C
4D
4E
4F
50
Display Com. Error
Check all connections. Remove the battery and
put it back in before restarting the system.
3B
51
52
53
Display int. Sensor Error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
3C 54 Displaycong.Error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
3D 55 Display Overheat
Your FLYER e-bike is outside the permitted tem-
perature range. Restart the system. If the problem
persists, contact your FLYER specialist retailer.