FOR-A MFR-6000 - Page 6

6
Upon Receipt
MFR-6000 units and their accessories are fully inspected and adjusted prior to shipment. Check your
received items against the packing lists below. Check to ensure no damage has occurred during
shipment. If damage has occurred, or items are missing, inform your supplier immediately.
 Main Unit
ITEM
QTY
REMARKS
MFR-6000
1
AC Cord
1 set
AC cable and retaining clip
Rack Mount Brackets
1 set
EIA standard type (Attached to unit.)
CD-ROM
1
Operation manual (PDF)
Quick Setup Guide
1
 Input / Output Cards
ITEM
QTY
REMARKS
MFR-9SDI12G
1-16*
9 SDI-input card
MFR-9SDO12G
1-16*
9 SDI-output card
MFR-8SDIEX
1-16*
8 SDI-input card
MFR-8SDOEX
1-16*
8 SDI-output card
MFR-2SDIGB
1-11*
8 SDI-input card (Gearbox 2ch built-in)
MFR-2SDOGB
8 SDI-input card (Gearbox 2ch built-in)
* The number of installed cards varies depending on the system configuration. See Sec. 2-1-1. “Matrix
Size Chart.”
 Option (for MFR-6000)
ITEM
QTY
REMARKS
MFR-CPUA
1
Redundant CPU card
MFR-PSA
1 set
Redundant power supply unit (with AC cord
and AC cord retaining clip.)
MFR-8/18/39RUA
MFR-18/39/40RU
MFR-16RU/16RUD/16RUTA
MFR-16/32/64RUW
1
Remote Control Unit
 Interface Expansion Unit
ITEM
QTY
REMARKS
MFR-GPI
1
AC Adaptor *
1
With DC lock plug
AC Cord
1
Rack Mount Brackets
1 set
EIA standard type
LAN Cable (straight)
1
* Depending on date of production, AC adapter is supplied without DC lock plug, but with a DC cable
retaining clip.