Fortinet FortiVoice 200D - System Route

Fortinet Technologies Inc. Page 100 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
system route
Use this command to configure static routes.
Syntax
config system route
edit <route_int>
set destination <destination_ipv4mask>
set gateway <gateway_ipv4>
end
Variable Description Default
<route_int> Enter the index number of the route in the routing table.
destination
<destination_ipv4mask>
Enter the destination IP address and netmask of traffic
that will be subject to this route, separated with a space.
To indicate all traffic regardless of IP address and
netmask, enter 0.0.0.0 0.0.0.0.
0.0.0.0
0.0.0.0
gateway
<gateway_ipv4>
Enter the IP address of the gateway router. 0.0.0.0