Fortinet FortiVoice 200D - System Admin

Fortinet Technologies Inc. Page 79 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
system admin
Use this command to configure FortiVoice administrator accounts.
By default, FortiVoice units have a single administrator account, admin. For more granular
control over administrative access, you can create additional administrator accounts with
restricted permissions.
Syntax
config system admin
edit <name_str>
set access-profile <profile_name>
set is-system-admin {no | yes}
set language <lang_str>
set access-profile <profile_name>
set password <password_str>
set sshkey <key_str>
set trusthosts <host_ipv4mask>
end
Variable Description Default
<name_str> Enter the name of the administrator account.
access-profile
<profile_name>
Enter the name of an access profile that determines
which functional areas the administrator account may
view or affect.
super_
admin_prof
is-system-admin {no |
yes}
Enter yes to indicate that the administrator account may
view all settings on the FortiVoice unit.
yes
language <lang_str> Enter this administrator account’s preference for the
display language of the web-based manager. Available
languages vary by whether or not you have installed
additional language resource files.
To view a list of languages, enter a question mark ( ? ).
password
<password_str>
Enter the password for the administrator account.
Caution: Do not enter a FortiVoice administrator
password less than six characters long. For better
security, enter a longer password with a complex
combination of characters and numbers, and change the
password regularly. Failure to provide a strong password
could compromise the security of your FortiVoice unit.