Fortinet FortiVoice 200D - Profile Caller-ID-Translate

Fortinet Technologies Inc. Page 66 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
profile caller-id-translate
Use this command to change the phone number, caller’s name, or both that will appear on the
other phone when the local extension is used to make a VoIP call.
Caller ID modifications are used when configuring outbound dial plans.
Syntax
config profile caller-id-translate
edit <name>
set match-name <string>
set match-number <string>
set new-name <string>
set postfix <string>
set prefix <string>
set strip-digits <int>
set truncate-digits <int>
end
Variable Description Default
<name> Enter the name for this caller ID modification record.
match-name <string> Enter the caller ID that you want to map to another one.
Caller IDs are created when configuring SIP extensions.
See extension user.
match-number <string> Enter the extension number or number pattern you
want to modify.
For example, you can enter 8134 to modify a single
extension, or 81xx to modify all the four-digit numbers
starting with 81.
XX
new-name <string> Enter the new caller ID name to which you want to map
the one entered in match-name <string>.
postfix <string> If you have entered a match-number <string>, enter a
number after the extension.
For example, if your match number is 8134 and postfix
is 5, the caller ID will be 81345.
prefix <string> If you have entered a match-number <string>, enter a
number before the extension.
For example, if your match number is 8134 and prefix is
5, the caller ID will be 58134.