Fortinet FortiVoice 200D - Config Dialplan Outbound

Fortinet Technologies Inc. Page 32 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
config dialplan outbound
Use this sub-command to configure dial plans for outgoing calls from the FortiVoice unit.
You can configure dial plans on the FortiVoice unit to route calls made from a FortiVoice
extension to an external phone system. The external phone system can be one or more PSTN
lines or a VoIP service provider. To route calls to an external phone system, you add dial plan
rules that define the extra digits that extension users must dial to call out of the FortiVoice unit.
The rules also control how the FortiVoice unit handles these calls including whether to block or
allow the call, the destinations the calls are routed to and whether to add digits to the beginning
of the dialed number.
For example, if users should be able to dial 911 for emergencies, you should include a dial plan
rule that sends all calls that begin with 911 to an external phone system. This rule should also
override the default outgoing prefix so that users can dial 911 without having to dial 9 first.
Syntax
config dialplan outbound
edit <name>
config call-handling
edit <No.>
set action {allow | allow-with-warning | deny | deny-with-
warning}
set delay <integer>
set modify-callerid <name>
set schedule <name>
set trunk-out <name>
config dial pattern
edit <No.>
set pattern <string>
set postfix <string>
set prefix <string>
set strip-digits <integer>
config from-callerid
edit <No.>
set number-pattern <string>
set status {enable | disable}
set option <emergency-call>
end
Variable Description Default
<name> Enter a name for the outbound plan.
<No.> Enter a record number for the call handling action.
action {allow | allow-
with-warning | deny |
deny-with-warning}
Enter the call handling action for the numbers matching
the configured number pattern and the caller IDs
matching the caller ID pattern.
allow
delay <integer> If you want to discourage certain users for making
outbound calls, enter the call delay time in seconds.
0
modify-callerid <name> Enter the caller ID modification configuration.
schedule <name> Enter the FortiVoice operation schedule for the action.