Fortinet Technologies Inc. Page 138 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
telnettest
Use this command to test Telnet connectivity to a specified host.
Syntax
execute telnettest {<fqdn_str> | <host_ipv4>}[:<port_int>]
Variable Description Default
{<fqdn_str> |
<host_ipv4>}
Enter the IP address or fully qualified domain name
(FQDN) of the Telnet server.
No
default.
[:<port_int>] If the Telnet server listens on a port number other than
port 23, enter a colon (:) followed by the port number.
:23
To Next Page
Loading...
