Fortinet FortiVoice 200D - System Time Manual

Fortinet Technologies Inc. Page 103 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
system time manual
Use this command to manually configure the system time of the FortiVoice unit.
Accurate system time is required by many features of the FortiVoice unit, such as log messages.
This command applies only if NTP is disabled. Alternatively, you can configure the FortiVoice
unit to synchronize its system time with an NTP server. For details, see “system time ntp” on
page 104.
Syntax
config system time manual
set daylight-saving-time {disable | enable}
set zone <zone_int>
end
Variable Description Default
daylight-saving-time
{disable | enable}
Enable to automatically adjust the system time for
daylight savings time (DST).
enable
zone <zone_int> Enter the number that indicates the time zone in which
the FortiVoice unit is located.
12