Fortinet FortiVoice 200D - Nslookup

Fortinet Technologies Inc. Page 124 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
nslookup
Use this command to query the DNS server for domain name or IP address mapping or for any
other specific DNS record.
Syntax
execute nslookup name <fqdn | ip> type <type> class <class> server
<dns_server> port <port_number>
Variable Description Default
name <fqdn | ip> type <type>
class <class> server <dns_server>
port <port_number>
<fqdn | ip>: enter either an IP address or a fully
qualified domain name (FQDN) of a host.
<type>: optionally specify the DNS query type:
• A -- host address
• AAAA -- IPv6 address
• ANY -- all cached records
• CNAME -- canonical name
• DLV -- DNSSEC lookaside validation
• DNSKEY -- DNS key
• DS -- delegation signer
• MX -- mail exchanger
• NS -- authoritative name server
• NSEC -- next SECure
• NSEC3 -- NSEC3 parameters
• PTR -- domain name pointer
• RRSIG -- DNSSEC signature
• SOS -- start of authority zone
• SPF -- sender policy framework
• TA -- DNSSEC trust authorities
• TXT -- text string
The default type is A.
<class>: optionally specify the DNS class type:
either IN or ANY.
<dns_server>: optionally specify the DNS
server’s host name or IP address. If you do not
specify the server here, FortiMail will use its local
host DNS settings.
<port_number>: optionally specify the port
number of the DNS server.
A
ANY
53