Fortinet Technologies Inc. Page 129 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
ping6
Use this command to perform a ping6 request to an IPv6 host by specifying its fully qualified
domain name (FQDN) or IP address, using the options configured by “ping6-option” on
page 130.
Pings are often used to test connectivity.
Syntax
execute ping6 {<fqdn_str> | <host_ipv4>}
Variable Description Default
ping6 {<fqdn_str> | <host_ipv4>} Enter either the IP address or fully qualified
domain name (FQDN) of the host.
To Next Page
Loading...
