Fortinet FortiVoice 200D - Log Setting Local

Fortinet Technologies Inc. Page 47 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
log setting local
Use this sub-command to configure storing log messages locally on the hard disk of the
FortiVoice unit.
To ensure that local hard disk has sufficient disk space to store new log messages and that it
does not overwrite existing logs, you should regularly download backup copies of the oldest log
files to your management computer or other storage, and then delete them from the FortiVoice
unit. (Alternatively, you could configure logging to a remote host.)
Syntax
config log setting local
set call-log-status {enable | disable}
set disk-full {overwrite | nolog}
set event-log-category {admin | configuration | dhcp | smtp |
system | voicemail}
set event-log-status {enable | disable}
set loglevel {emergency | alert | critical | error | warning |
notification | information | debug}
set rotation-hour <int>
set rotation-period <int>
set rotation-size <int>
set status {enable | disable}
end
Variable Description Default
call-log-status {enable |
disable}
Enable or disable voice logging. enable
disk-full {overwrite |
nolog}
Select what the FortiVoice unit will do when the local
disk is full and a new log message is caused, either:
• nolog: Discard all new log messages.
• overwrite: Delete the oldest log file in order to
free disk space, and store the new log message.
overwrite
event-log-category
{admin | configuration |
dhcp | smtp | system |
voicemail}
Enter the type of logs you want to record to the local
hard disk.
No event types are logged unless you enable this
option in event-log-status {enable | disable}.
• admin: Log all administrative events, such as
logins, resets, and configuration updates.
• configuration: Log configuration changes.
• dhcp: Log DHCP server events.
• smtp: Log SMTP relay or proxy events.
• system: Log all system-related events, such as
rebooting the FortiVoice unit.
• voicemail: Log voicemail events.
configuration,
admin,
system, dhcp
event-log-status {enable |
disable}
Enable or disable event logging. enable