Fortinet FortiVoice 200D - Page 48

Fortinet Technologies Inc. Page 48 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
loglevel {emergency |
alert | critical | error |
warning | notification |
information | debug}
Enter the severity level that a log message must equal
or exceed in order to be recorded to the local hard disk.
For information about severity levels, see the FortiVoice
Setup and Administration Guide.
information
rotation-hour <int> Enter the hour of the day (24-hour format) when the file
rotation should start.
Also see rotation-period <int>.
When a log file reaches either the age or size limit, the
FortiVoice unit rotates the current log file: that is, it
renames the current log file (elog.log) with a file name
indicating its sequential relationship to other log files of
that type (elog2.log, and so on), then creates a new
current log file. For example, if you set the log time to
10 days at hour 23, the log file will be rotated at 23
o’clock of the 10th day.
0
rotation-period <int> Enter the number of days before the file rotation should
start. Also see rotation-hour <int>.
10
rotation-size <int> Enter the file size limit of the current log file in
megabytes (MB). The log file size limit must be between
10 MB and 1000 MB.
10
status {enable | disable} Enable or disable logging to the local hard disk. enable
Variable Description Default