Fortinet FortiVoice 200D - Pbx Call-Parking

Fortinet Technologies Inc. Page 53 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
pbx call-parking
Use this command to configure call parking which places a call on hold and then retrieving it
from any other local extension. By default, the FortiVoice unit has 20 park orbits, 101–120.
Syntax
config pbx call-parking
set extension <string>
set music-on-hold <name>
set parked-start <int>
set parked-end <int>
set timeout <int>
end
Variable Description Default
extension <string> Enter the number to dial to park a call.
For example, if you enter 100, depending on the phone,
when a user receives a call and wants to park it, the
user may:
• press #100.
The FortiVoice unit selects the first available park
orbit (101–120). The user hears a confirmation
indicating the caller has been parked successfully
and into which park orbit.
• Provide the park orbit to the person with the parked
call through paging or other means (e.g. “Mary,
there is a call parked for you in 101).
300
music-on-hold <name> Enter a sound file for the call parking.
parked-start <int> Enter the starting park orbit. 301
parked-end <int> Enter the ending park orbit. 320
timeout <int> Enter the time in seconds to time out the parked call. 80