Fortinet FortiVoice 200D - Service Recording

Fortinet Technologies Inc. Page 77 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
service recording
For supervision and monitoring purpose, use this command to configure recording incoming
and outgoing calls to and from the extensions matching the caller number patterns or dialed
number patterns you set.
Syntax
config service recording
edit <name>
set callee-number-pattern <string>
set caller-number-pattern <string>
set status {enable | disable}
end
Variable Description Default
<name> Enter a name for the call recording configuration.
callee-number-pattern
<string>
Enter the number pattern to match the dialed phone
numbers.
For information on pattern-matching syntax and
pattern-matching examples, see “pbx number-
management” on page 57.
caller-number-pattern
<string>
Enter the number pattern to match the callers’ phone
numbers.
For information on pattern-matching syntax and
pattern-matching examples, see “pbx number-
management” on page 57.
20
status {enable | disable} Enable to activate this call recording. enable