Fortinet Technologies Inc. Page 76 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
service conference
Use this command to configure conference call settings.
Syntax
config service conference
edit <name>
set admin-pin <string>
set description <string>
set join-message <name>
set music <name>
set music-on-hold {enable | disable}
set number <string>
set quiet-mode {enable | disable}
set status {enable | disable}
set user-join-or-leave <name>
set user-pin <string>
set user-privilege <name>
end
Variable Description Default
<name> Enter a name for the conference call configuration.
admin-pin <string> Enter the number to be entered by the conference host
to be able to host a conference call.
123123
description <string> Enter any notes for this conference call.
join-message <name> Enter the name of the joining message for the
conference call.
music <name> Enter the music to play for music on hold.
music-on-hold {enable |
disable}
Enable to play background music that callers hear after
the joining message and leaving message are played.
disable
number <string> Enter an extension number that callers can call and
enter the user PIN to join a conference call.
quiet-mode {enable |
disable}
Enable to mute the background sound that callers hear
after the joining message and leaving message are
played.
disable
status {enable | disable} Enable to activate this conference call. enable
user-join-or-leave
<name>
Enter the name of the message to play when someone
joins or leaves a conference call.
user-pin <string> Enter a password for joining the conference call. A
caller needs to dial the conference call number and
enter this password to join the conference call.
123456
user-privilege <name> Enter the user privilege for this conference call.
To Next Page
Loading...
