Fortinet FortiVoice 200D - System Global

Fortinet Technologies Inc. Page 94 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
system global
Use this command to configure many FortiVoice system-wide configurations.
Syntax
config system global
set admin-idle-timeout <timeout_int>
set admin-scp {enable | disable}
set default-certificate <name_str>
set disk-monitor {enable | disable}
set hostname <host_str>
set local-domain-name <name_str>
set port-http <port_int>
set port-https <port_int>
set port-ssh <port_int>
set port-telnet <port_int>
end
Variable Description Default
admin-idle-timeout
<timeout_int>
Enter the amount of time in minutes after which an idle
administrative session will be automatically logged out.
The maximum idle time out is 480 minutes (8 hours). To
improve security, do not increase the idle timeout.
5
admin-scp
{enable | disable}
Enable to allow system configuration download by SCP. disable
default-certificate
<name_str>
Enter the name of a local certificate to use it as the
“default" (that is, currently chosen for use) certificate.
FortiVoice units require a local server certificate that it
can present when clients request secure connections.
disk-monitor
{enable | disable}
Enable to monitor the hard disk status of the FortiVoice
unit. If a problem is found, an alert email is sent to the
administrator.
disable
hostname <host_str> Enter the host name of the FortiVoice unit. Varies by
model.
local-domain-name
<name_str>
Enter the local domain name of the FortiVoice unit.
port-http <port_int> Enter the HTTP port number for administrative access on
all interfaces.
80
port-https <port_int> Enter the HTTPs port number for administrative access
on all interfaces.
443
port-ssh <port_int> Enter the SSH port number for administrative access on
all interfaces.
22
port-telnet <port_int> Enter the TELNET port number for administrative access
on all interfaces.
23