Fortinet FortiVoice 200D - Mailsetting Relayserver

Fortinet Technologies Inc. Page 51 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
mailsetting relayserver
Use this command to configure an SMTP relay, if needed, to which the FortiVoice unit will relay
outgoing email. This is typically provided by your Internet service provider (ISP), but could be a
mail relay on your internal network.
Syntax
config mailsetting relayserver
set auth-password <password_str>
set auth-status {enable | disable}
set auth-type {auto | plain | login | digest-md5 | cram-md5}
set auth-username <user_str>
set server-name <relay_fqdn>
set server-port <port_int>
set smtps {enable | disable}
end
Variable Description Default
auth-password
<password_str>
If auth-status {enable | disable} is enable, enter the
password of the FortiVoice unit’s user account on the
SMTP relay.
auth-status {enable |
disable}
Enable if the SMTP relay requires authentication using
the SMTP AUTH command. Also configure auth-
username <user_str>, auth-password
<password_str>, and auth-type {auto |
plain | login | digest-md5 | cram-md5}.
disable
auth-type {auto | plain |
login | digest-md5 |
cram-md5}
If auth-status {enable | disable} is enable, enter either
the SMTP authentication type required by the SMTP
relay when the FortiVoice unit sends the ESMTP AUTH
command, or enter auto to automatically detect and
use the most secure authentication type supported by
the relay server.
auto
auth-username
<user_str>
If auth-status {enable | disable} is enable, enter the
name of the FortiVoice unit’s user account on the SMTP
relay.
server-name
<relay_fqdn>
Enter the fully qualified domain name (FQDN) of the
SMTP relay.
server-port <port_int> Enter the TCP port number on which the SMTP relay
listens.
25
smtps {enable | disable} Enable to initiate SSL- and TLS-secured connections to
the SMTP relay if it supports SSL/TLS. When disabled,
SMTP connections from the FortiVoice unit’s built-in
MTA or proxy to the relay will occur as clear text,
unencrypted.
This option must be enabled to initiate SMTPS
connections.
disable