Fortinet FortiVoice 200D - Pbx System-Speed-Dial

Fortinet Technologies Inc. Page 62 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
pbx system-speed-dial
Use this command to configure speed dial pattern for fast and efficient dialing, mostly for
outbound numbers.
Syntax
config pbx system-speed-dial
edit <name>
set code <string>
set description <string>
set number <string>
end
Variable Description Default
<name> Enter a name for the speed dial mapping.
code <string> Enter the number based on the speed dial pattern you
set. For example, 333.
description <string> Enter a note for the mapping, such as “This is for
customer A”.
number <string> Enter the phone number to map to the speed dial code.
For example, 222-1234.