Fortinet FortiVoice 200D - Profile Sip-Setting

Fortinet Technologies Inc. Page 68 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
profile sip-setting
Use this command to create SIP settings for configuring extensions and SIP trunks.
Syntax
config profile sip-setting
edit <name>
set codecs {g711u | g711a | g729 | g722 | g723.1 | g726 | gsm}
set direct-media {enable | disable}
set dtmf {auto | inband | info | rfc2833 | shortinfo}
set nat {enable | disable}
set preferred-codecs {g711u | g711a | g729 | g722 | g723.1 |
g726 | gsm}
set qualify-check-interval <integer>
set transport {tcp | tls | udp}
set
end
Variable Description Default
<name> Enter a name for this SIP setting.
codecs {g711u | g711a |
g729 | g722 | g723.1 |
g726 | gsm}
Enter the Codecs supported by the service provider
from the displayed list.
Also configure preferred-codecs {g711u | g711a | g729 |
g722 | g723.1 | g726 | gsm}.
g711u g711a
g729 g722
g723.1 g726
gsm
direct-media {enable |
disable}
Enable if the service provider supports direct media
transfer to extensions by bypassing the PBX in
between.
enable
dtmf {auto | inband | info
| rfc2833 | shortinfo}
Enter the DTMF method used by the VoIP provider.
Auto means the VoIP provider’s server and the
FortiVoice unit will negotiate to select a DTMF method.
You could also select a specific DTMF method if
required.
auto
nat {enable | disable} Enable if the service provider supports SIP NAT
translation.
enable
preferred-codecs {g711u
| g711a | g729 | g722 |
g723.1 | g726 | gsm}
Enter the preferred Codec for the VoIP provider. The
preferred Codec is usually the most used one in your
area and provides the best quality of communication.
If your preferred Codec is different from that of your
service provider, the service provider’s Codec will be
used as long as it is one of your supported Codecs.
Also configure codecs {g711u | g711a | g729 | g722 |
g723.1 | g726 | gsm}.
g711u