Fortinet FortiVoice 200D - Log Setting Remote

Fortinet Technologies Inc. Page 45 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
log setting remote
Use this sub-command to configure storing log messages remotely on a Syslog server or a
FortiAnalyzer unit.
You can add a maximum of three remote Syslog servers.
Syntax
config log setting remote
edit <No.>
set call-log-status {enable | disable}
set comma-separated-value {enable | disable}
set event-log-category {admin | configuration | dhcp | smtp |
system | voicemail}
set event-log-status {enable | disable}
set facility <name>
set loglevel {emergency | alert | critical | error | warning |
notification | information | debug}
set port <port_number>
set server <ip_string>
set status {enable | disable}
end
Variable Description Default
<No.> Enter an ID for the Syslog server or FortiAnalyzer unit
where the FortiVoice unit will store the logs.
call-log-status {enable |
disable}
Enable or disable voice logging. disable
comma-separated-value
{enable | disable}
Enable this option if you want to send log messages in
comma-separated value (CSV) format.
Do not enable this option if the remote host is a
FortiAnalyzer unit. FortiAnalyzer units do not support
CSV-formatted log messages.
disable
event-log-category
{admin | configuration |
dhcp | smtp | system |
voicemail}
Enter the type of logs you want to record to this storage
location.
No event types are logged unless you enable this option
in event-log-status {enable | disable}.
• admin: Log all administrative events, such as logins,
resets, and configuration updates.
• configuration: Log configuration changes.
• dhcp: Log DHCP server events.
• smtp: Log SMTP relay or proxy events.
• system: Log all system-related events, such as
rebooting the FortiVoice unit.
• voicemail: Log voicemail events.
event-log-status {enable |
disable}
Enable or disable event logging. disable