Fortinet Technologies Inc. Page 49 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
log alertemail recipient
Use this command to add up to 3 email addresses that will receive alerts.
Before the FortiVoice unit can send alert email messages, you must configure it with one or
more recipients.
You must also configure which categories of events will cause the FortiVoice unit to send alert
email message. For more information, see “log alertemail setting” on page 50.
Syntax
config log alertemail recipient
edit <recipient_email>
end
Variable Description Default
<recipient_email> Type an email address that will receive alert email.
To Next Page
Loading...
