Fortinet FortiVoice 200D - Page 46

Fortinet Technologies Inc. Page 46 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
facility <name> Enter the facility identifier that the FortiVoice unit will use
to identify itself when sending log messages.
To easily identify log messages from the FortiVoice unit
when they are stored on a remote logging server, enter a
unique facility identifier, and verify that no other network
devices use the same facility identifier.
kern
loglevel {emergency |
alert | critical | error |
warning | notification |
information | debug}
Enter the severity level that a log message must equal or
exceed in order to be recorded to this storage location.
For information about severity levels, see the FortiVoice
Setup and Administration Guide.
information
port <port_number> If the remote host is a FortiAnalyzer unit, enter 514; if the
remote host is a Syslog server, enter the UDP port
number on which the Syslog server listens for
connections (by default, UDP 514).
514
server <ip_string> Enter the IP address of the Syslog server or FortiAnalyzer
unit where the FortiVoice unit will store the logs.
status {enable | disable} Enable or disable logging to the remote host. disable
Variable Description Default