Fortinet FortiVoice 200D - Page 102

Fortinet Technologies Inc. Page 102 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
tcp-port <port_num> If you entered tcp in transport {tcp | tls | udp}, enter the
TCP port used for SIP.
5060
tls-client-protocol {sslv2
| sslv3 | tlsv1}
Enter the TLS protocol version. tlsv1
tls-port <port_num> If you entered tls in transport {tcp | tls | udp}, enter the
TLS port used for SIP.
5061
tls-server-cert-
verification {enable |
disable}
Enable for the TLS clients to confirm the validity of a
server’s credentials with a trusted root certification
authority’s (CA’s) certificates.
disable
transport {tcp | tls | udp} Enter the port used for SIP.
Also configure tcp-port <port_num>, tls-client-protocol
{sslv2 | sslv3 | tlsv1}, and udp-port <port_num>
depending on your selection.
tcp tls udp
udp-port <port_num> If you entered udp in transport {tcp | tls | udp}, enter the
UDP port used for SIP.
5060
Variable Description Default