Fossil Watch - Receiving Beamed Information

Beaming Information
Beaming an application
Wrist PDA User Guide 109
Beaming an application
To beam an application:
1. From the Applications Launcher, tap the tab in the upper-left
corner to display the menu.
2. From the App menu, tap Beam.
3. Tap the application you want to transfer, and tap Beam.
NOTE: Some applications are copy-protected and cannot be
beamed, as indicated by a lock icon.
4. When the Beam Status dialog box appears, point the IR port
directly at the IR port of the receiving device.
When the Beam Status dialog box indicates that the transfer is
complete, you can resume working on your watch.
Receiving beamed information
To receive beamed information:
1. If necessary, wake your watch into PDA mode by pressing Rocker
Enter.
2. Point the IR port directly at the IR port of the transmitting device
to open the Beam Status dialog box.
3. Tap Yes.
4. Wait for the Beam Status dialog box to indicate that the transfer is
complete, and then tap OK to display the new entry.
5. Incoming records are placed in the Unfiled category.