Wrist PDA User Guide 131
10
Maintaining Your
Wrist PDA
Resetting your watch
You may have to perform a reset if your watch no longer responds
to the stylus or to buttons on the screen. This allows your watch to
get a fresh start, similar to rebooting a PC.
Performing a Soft Reset
A soft reset can resolve most problems and does not affect any
personal data stored on the watch. To perform the reset, gently
insert the stylus into the hole labeled Reset on the back of the watch.
Performing a Hard Reset
WARNING: Performing a hard reset erases everything on your watch. All
personal data, third-party applications, and records are deleted, and the
watch is returned to its factory default settings.
If possible, back up all personal data before performing a hard reset.
Try resolving your problem first using a soft reset (see above).
To perform a hard reset:
1. Hold in on the Rocker switch and insert the stylus into the hole
labeled Reset on the back on the watch.
2. When the Palm Powered
TM
logo appears on the display, release
the Rocker switch.
To Next Page
Loading...
Need help?
General