Introduction to the Wrist PDA Watch
Displaying the time
Wrist PDA User Guide 15
Displaying the time
Your Wrist PDA watch automatically displays the time after a brief
period of inactivity (when you have not used the stylus or pressed
any of the buttons). You can select the specific period of time after
which the watch face will appear, ranging from 30 seconds to two
minutes. See page 99 for instructions on setting the time delay.
NOTE: For ease of viewing in dark conditions, turn on the
electroluminescent (EL) backlight. Press and hold the Back button
on the left side of the watch until the light activates.
See these sections for more information:
• To set the date and time, see page 96
• To select a different watch face style from various built-in
options, see page 99
You can also install third-party applications for displaying the time,
but they will not automatically run like the built-in watch feature.
See page 37 for instructions on installing add-on applications.
Switching to PDA mode
When the watch face is displayed, you can switch to PDA mode by
pressing and holding the Rocker switch on the right side of the
watch.
NOTE: You can set how long you have to hold the button to
switch to PDA mode. See page 98.
Press to activate PDA mode
To Next Page
Loading...
Need help?
General